Access / Servers / Radius¶
Configuring a Radius server for user authentication in services like vpn or captive portal is easy just go to and click on Add server in the top right corner.
Fill in the form:
Descriptive name |
radius_test |
Enter a descriptive name |
Type |
Radius |
Select Radius |
Hostname or IP address |
10.10.10.1 |
Enter the IP of your Radius server |
Shared Secret |
secret |
Shared secret for your Radius server |
Services offered |
Authentication |
Select Authentication,for Captive portal + accounting |
Authentication port value |
1812 |
Port number, 1812 is default; for accounting it’s 1813 |
Authentication Timeout |
5 |
Timeout for Radius to respond on requests |
Use the tester under to test the Radius server.
If you want to use the FreeRADIUS plugin set up the server as 127.0.0.1 and don’t forget to add a Client in the FreeRADIUS configuration.